| |
Please
double check your machine's model number. Backup all important data/program
in your hard disk before performing BIOS update. FOSA DOES NOT
responsible for any damage caused directly or indirectly by any file(s)
posted in this website.
If further information needed, please email our technical department
at support@fosa.com.
***
Update at Your Own Risk ***
Model
1100P Back
To Up
Version
R1.17
This version is released to workaround the following problem:Touchpad
is uncontrollable when battery is getting into its low state.
Version
R1.15
This version is released to workaround the following problem: After
system is resumed from S2D, the USB device may not be detected correctly.
Version R1.11
This version is released to fix the following problem: System may
hang up sometimes when restarting from the Windows 9x mode to the
MS-DOS mode.
Version
R1.09
This release includes the following changes from the previous release.
1. Support for 10GB HDD is appended.
2. Support for Software MODEM Module is appended.
Version
R1.07
This release includes the following change:
1. For more power-saving and longer battery life, the fan will be
stopped when system is suspended.
Version
R1.03
Initial Release
Version
R1.27
This
version is released to include the following change:
1.
Supports for 10GB HDD is added.
Version:
R1.25
This version is released to workaround the following issue:
1. The option of Disable Internal Touchpad has been added into SCU.
2. The option of Disable/Enable Power-On beeping sound has been added
into SCU.
3. Booting from CD-ROM drive directly when primary HDD is not installed
is now supported.
4. A fix to “System performance is slow when 96-MB DRAM is installed”has
been added.
5. A workaround for “System hangs intermittently when it is resumed
from Suspend-to-Disk" has been added.
Version:
R1.23
This version is released to workaround the following issue:
The COM1 port under Windows 9x will be disabled once the COM2 port
option in the SCU is disabled.
Version:
R1.19
This version is released to workaround the following issue:
System fails in performing Power-on-Suspend after the option of "Modem
Ring Resume" in the SCU is enabled.
Version:
R1.17
This version is released to workaround the following issue:
System fails in restarting from Windows 98 to DOS Mode if smart battery
is installed.
Version:
R1.13
This version is released to workaround the following problems:
1. System is not bootable after 64-MB EDO RAM is installed.
2. Incorrect CPU clock is reported during POST.
Version
R1.12
This
release includes the following changes from the previous release.
1. Added support for Microsoft Intellimouse.
2. Disable/Enable option for PS/2 mouse is added.
3. For more power saving, fan speed control feature is added.
Version
R1.00
Initial Release
VersionR1.27
This release includes the following change :
Support for S3 M5+ VGA chipset is appended.
VersionR1.23
This release includes the following changes :
1. Support for 10GB HDD is appended.
2. Remove the string of "Intel MMX CPU" from POST screen.
VersionR1.22
The
release includes the following change :
1. Support for 8GB HDD is appended.
Version
R1.21
The
version is released to workaround the following issues:
1. IrDA port can not be detected under Windows 98.
2. System fails to start up intermittently when single DIMM is used.
Version
R1.20
The
version is released to workaround the following issues:
1. IrDA port can not be detected under Windows 98.
Version
R1.13
The version is released to workaround the following issue
Supports 128*2 MB SDRAM.
Version
R1.12
The
version is released to fix the following problem
Incorrect CPU speed is reported during POST.
Version
R1.10
The version is released to fix the following problem
System fails in restarting from Windows 98 to DOS Mode if smart battery
is installed.
Version
R1.06
The
following feature is added into this release
1. For more power saving, fan speed control feature is added.
Version
R1.03
The following feature is added into this release
1. Added Support for AMD K6 266/300 MHz CPUs.
Version
R1.02
Initial
Release
Version
R1.16
This version is released to fix the following problems:
1. Switching to TV by pressing hotkey Fn+F6 has been removed.
2. "Mute" feature by pressing hotkey Fn+Z has been added.
Version
R1.13
This version is released to fix the following problems:
1. System is not bootable sometimes when EDO DIMM is used.
2. S2D partition is not detected if the HDD is duplicated by using
Ghost 5.1.
Version
R1.07
This release includes the following changes from the previous release.
1. Support for 10GB HDD is appended.
2. Supports internal PCI LAN & MODEM Module.
Version
R1.03
Version
R1.10
This version is released to fix the following problems:
1. Speed up the boot up speed with bootable CD.
Version
R1.09
This version is released to fix the following problems:
1. Fix intermittent freeze up problem while booting with 133MHz
FSB CPUs under Windows ME.
2. Added USB mouse/keyboard wakeup from Standby under Windows
2000.
Version
R1.06
This release includes the following changes from the previous
release.
1. Fix CPU frequency detected wrong when Celeron 766Mhz is installed.
Version
R1.04
This version is released to fix the following problems:
1. Fix CPU frequency detected wrong when Celeron 566Mhz or 633MHz
is installed.
2. Support Intel D stepping CPUs.
3. Keypad lock Enable/Disable function added.
Version
R1.02
This version is released to fix the following problems:
1. Update the LAN MAC address when it is lost by low CMOS battery.
2. Disable the Hotkey function in CMOS (BIOS) setup.
Version
R1.01
Model
2850 Back
To Up
Version
5.18C
This version is released to fix the following problems:
1. Added support for Intel D stepping CPUs. Motherboard version must
also be V2.5GL1V8(A) in order to support D stepping CPUs..
Version
5.14C
This version is released to fix the following problems:
1. Fix intermittent computer freeze up after pressing "CTRL-ALT-DEL"
or loading CMOS default setting.
Version
5.12C
This release includes the following changes from the previous release.
1. Fix HDD cannot be formatted during Windows setup after booted off
the Windows ME CD.
Version
5.11C
This version is released to fix the following problems:
1. Modem vendor information added in BIOS setup, under "System
Information".
Version
R1.31 (For Model 3100C3 ONLY)
Added support for Intel Pentium III CPU with new CPU ID.
Version
R1.30
Added support for 256MB SO DIMM module.
Version
R1.25 (For Model 3100C3 ONLY)
Added support for Intel Pentium III 700/750 MHz CPU.
Version
R1.24
Speed up the CD-ROM boot up speed.
Version
R1.23
This release includes the following changes:
1. Internal Modem dial-up problem.
2. Delayed mouse cursor under Windows 2000.
Version
R1.16
This release includes the following changes :
1. LCD+TV, and LCD+TV+CRT have been removed from SCU.
2. Fn+F6 hotkey feature has been removed.
3. Support FAT 32 utility.
4. Support "Mute Icon" when muted.
5. Support "BootStar" boot manager.
6. Support FC-PGA 370 Pentium III CPU.
Version
R1.15
"Advance CPU Control" will be disabled when desktop CPU
Celeron (socket 370) 400 MHz or faster CPU is detected.
Version
R1.12
This release includes the following changes:
1. A solution to a problem that touchpad is out of control after resuming
from STD has been fixed.
Version
R1.10
This release includes the following changes :
1. Supports Intel 443ZXM/ 443BX North Bridge.
2. Fixes the random error message of battery during POST while no
battery is installed.
Version
R1.09
This version is released to workaround the following problem:
Touchpad is uncontrollable sometimes when battery is getting into
its low state.
Version
R1.07
This version is released to workaround the following issue:
When smart battery is installed, the alarm cycle of battery low is
too long.
Version
R1.03
This version is released to workaround the following issue:
The alert cycle of battery low is too long.
Version
R1.00
Version
R1.26
Support RAM up to 512 MB.
Version
R1.22
Support for DMI data function added.
Version
R1.20
Support for PIII CPU added.
Version
R1.18
Version
R1.13
"Advance CPU Control" will be disabled when desktop CPU
Celeron (socket 370) 400 MHz or faster CPU is detected.
Version
R1.10
This version is released to workaround the following problem:
1.Supports Intel 443ZXM/ 443BX North Bridge.
2.A solution to a problem that touchpad is out of control after resuming
from STD has been fixed.
Version
R1.08
This version is released to workaround the following problem:
Touchpad is uncontrollable sometimes when battery is getting into
its low state.
Version
R1.04
This version is released to workaround the following: when smart battery
is installed, the alarm cycle of battery low is too long.
Version
R1.03
This release includes the following change from the previous release:
System fails in booting up sometimes when EDO RAM is installed.
Version
R1.02
This release includes the following change from the previous release:
1.Support for DSTN Panel is added.
Version
R1.00: Date: 04/29/1999 Size:182k
Version
2.4
This version has been released to fix the following problems:
System clock will automatically roll over the new millennium (Year
2000).
2.When playing hardware MPEG under Windows 95 and switching the screen
to the DOS full screen mode, certain remains were left on the screen.
Version:
R2.02
This version is released to workaround the following issue:
Supports AMD K6-2 300 MHz CPU.
Version:
R2.01
This version is released to workaround the following issue:
The Windows Logo is disappeared after system is resumed from Suspend-to-Disk.
Version:
R1.10
This version is released to workaround the following issue:
Added support for Windows 98.
Version:
R1.06
This version is released to workaround the following
problems:
1. The LCD is whitened when restarting the system or switching the
display mode by pressing Fn+F6.
2. Some noises occur on the CRT when displaying in CRT ONLY mode.
Version:
R1.05
This version is released to workaround the following problem:
System fails in working with DLink DE-660 under the Novell NetWare.
Version:1.04
The following VGA modes have been disabled:
1.The VGA modes 48h, 49h, 54h and 58h have been disabled in this version
of BIOS due to the 2-MB video memory does not support these VGA modes.
Version:
1.03
This
updated version is released to work around the following issues:
1.Optional Boot Devices IDE-2, IDE-3, SCSI and Network have been removed
from the Advance Setup Menu.
2.Floppy Drive Swap setting is removed from the Advance Setup Menu.
3.Removed the Docking logo from boot screen.
Version:
05-30T
This release includes the following changes from the previous release.:
Added "Windows 98 Compatible" option into SCU.
Note:
This version of BIOS is suitable for system fitted with TFT LCD panel
only.
Version:
05-30D
This release includes the following changes from the previous release.:
Added "Windows 98 Compatible" option into SCU.
Note:
This version of BIOS is suitable for system fitted with DSTN LCD panel
only.
Version:
05-28T
This version is released to workaround the following problem:
1. The display was messed up after resumed under Windows NT.
Note:
This version of BIOS is suitable for system fitted with TFT LCD panel
only.
Version:
05-28D
This
version is released to workaround the following problem:
1. The display was messed up after resumed under Windows NT.
Note:
This version of BIOS is suitable for system fitted with DSTN LCD panel
only.
Version
2.05
This updated version is released to work around the following issue:
1.The Windows 98 logo might not display correctly after resume from
suspend to disk.
Version
2.04
This updated version is released to work around the following issue:
1.The secondary HDD may not be detected when Panasonic CD-ROM drive
is installed.
Version
2.03
This updated version is released to work around the following issues:
1.After the USB driver is installed, system hangs when resuming from
suspending mode.
2.Add a "PC Card Speaker" option into SCU for selecting to Enable/Disable
PC modem card's tone.
Version
2.01
This
version is released to fix the following problems:
1. The WAV displays abnormally after "Resume-from-Disk" is performed.
2.The 1.44 floppy disk can not be accessed after 3M floppy disk is
used.
Version
2.00
The
following modification is made in this version:
1.The support for updated audio chipset ESS-1879 is added into this
version.
Note: If your system is fitted with ESS1879 audio chipset, please
perform "RUN1879.EXE" first before performing "FLASH.EXE" to update
your BIOS.
Version
1.08 Date:09/15/1997 Size:256k
The
following modifications have been made in this version:
1.Optional Boot Devices IDE-2, IDE-3, SCSI and Network have been removed
from the Advance Setup Menu.
2.Floppy Drive Swap setting is removed from the Advance Setup Menu.
3.Removed the Docking logo from boot screen.
4.Revised the optional item IrDA of COM2 by IrDA (HPSIR).
5.Added an optional I/O port 200h for Game Port.
6.Improved the output effect of TV-Out.
7.The problem that PC card can not be inserted/removed after resumed
from HDD is fixed.
8.The problem that Himem.SYS error message may occur once Antivirus
is installed under Windows 95 is fixed.
9.The problem that smart battery could be detected incorrectly is
fixed.
10.APM 1.2 testing is passed in SCT.
Version
R1.16
This version is released to workaround the following problem:
Keyboard and PS/2 mouse freeze when typing fast in WORDPAD under
Windows 2000.
Version
R1.14
1.
Switching to TV by pressing Fn+F6 hotkey has been removed.
2. "Mute" by pressing hotkey Fn+Z has been added.
Version
R1.11
This version is released to workaround the following problem:
Touchpad is uncontrollable sometimes when battery is getting into
its low state.
Version
R1.09
This version is released to workaround the following problem:
After system is resumed from S2D, the USB device may not be detected
correctly.
Version
R1.06
This release includes the following change from the previous release:
Support for ALTGr (Right ALT key) has been added.
Version
R1.02
Initial
Release
Version
R2.12 (For model 8800P3 ONLY)
1. PIII 750 MHz MMC2 CPU support added.
2. PC-100 256MB SODIMM support added.
Version
R2.07 (For model 8800P3 ONLY)
Version
R2.04 (For model 8800P3 ONLY)
Support Intel mobile PIII MMC 2 CPU on D04 PIII main board.
Version
R1.19
1. Switching to TV by pressing Fn+F6 hotkey has been removed.
(Microvision)
2. "Mute" by pressing hotkey Fn+Z has been added.
Version
R1.17
Version
R1.15
This version is released to workaround the following problem:
After system is resumed from S2D, the USB device may not be detected
correctly.
Version
R1.12
This release includes the following change from the previous release:
Support for ALTGr (Right ALT key) has been added.
Version
R1.05
This version is released to workaround the following issue:
1. Internal modem can not be detected correctly.
Version
R1.00
Initial
Release
Version
R1.12
This
version is released to include the following changes:
1. Support 8GB/ 10GB HDD added
Version
R1.10
This version is released to workaround the following
issues:
1. The option of Disable/Enable Power-On Beeping Sound has been added
into SCU.
2. A fix to “System performance is slow when 96-MB DRAM is installed”
has been added.
Version
R1.07
This
version is released to workaround the following issues:
1. The LS-120/ZIP drive can not be detected correctly under the
Windows 9x.
2. When AC adapter is plugged, the battery icon on the task bar can
not be switched to AC adapter icon.
3. Support for 2*128 MB SDRAM has been added.
4. System fails to perform Suspend-to-Disk under the Windows95 DOS
box.
Version
R1.05
This version is released to workaround the following issues:
1. Supports Internal Modem under Windows 98.
2. System hangs when restarting system under TV-OUT mode.
3. Smart battery can not be detected under Windows 98.
Version
R1.04
This version is released to workaround the following issue:
Enable Intelli-Mouse function for Windows 98.
Version
R1.03
This version is released to workaround the following issue:
Added support for Windows 98.
Version
R1.02
This version is released to workaround the following issues:
1. Certain CardBus cards can not be re-detected by Windows 95 after
resumed from suspending mode.
2. The "f" key is invalid when AC- Adapter is unplugged.
3. CMOS reports Incorrect HDD when HITACHI DK227A-50 5GB HDD is installed.
4. System hangs intermittently after resumed from suspending mode.
Version
R1.01
This release includes the following changes :
1. The video of MPEG II DVD is prohibited to display on the TV when
switching the screen to TV-OUT mode, it can only be displayed on the
LCD panel or on the external CRT (Follow the regulation of Macro-Vision).
2. 5-GB HDD is now supported on the system.
3. Booting from DVD-ROM is now supported.
4. Supports LS-120 module to run under Windows NT 4.0.
Version
R1.00
Initial
Release
VersionR1.10
This version is released to add the following function:
1. Support for 10/14 GB HD is appended.
Version
R1.08
This
version is released to workaround the following issues:
1. The LS-120/ZIP drive can not be detected correctly when
running under Windows 9x.
2. When AC adapter is plugged, the battery icon on the task bar can
not be switched to AC adapter icon.
3.Support for 2*128 MB SDRAM has been added.
Version
R1.07
This
version is released to workaround the following problem:
System hangs up when resuming from Suspend-to-Disk.
Version
R1.06
This
version is released to workaround the following problem:
Windows 98 can not be successfully installed when using Toshiba 1.3
GB HDD on the system.
Version
R1.05
This version is released to workaround the following problems:
1.The problem that CMOS reports incorrect HDD size is corrected.
2.The problem that incorrect SDRAM size is reported during POST is
fixed.
Version
R1.04
This version includes the following changes from the previous release:
1. The video of DVD is prohibited to display on the TV when switching
the screen to TV-OUT mode, it can only be displayed on the LCD panel
and/or CRT only. (Follow the regulation of Macro-Vision)
2. The problem that system could not be booted when using 4*16 SDRAM
is fixed,
3. Added support for AUTO-DETECT CD-ROM Drive during POST.
4. If the "LID SWITCH ONLY" is set in the SCU, system will turn off
the LCD panel only and will keep displaying on the external CRT when
LID is covered.
5. Internal modem module is now supported on the system.
6. Multi-Boot feature is now available. (Including LS-120, ZIP drive,
CD-ROM drive and DVD)
7. The problem that the "Fast Boot" option in the SCU can not be disabled
is fixed.
8. The First Boot Device will be set to driver A once Default Setting
in the SCU is performed.
9. Displaying of CPU ID during POST is supported. (Including AMD-k6-200
Tillamook-233/266)
10. The problem that the CPU Clock in the SCU may report incorrect
CPU speed when 266 MHz CPU is installed has been corrected.
Version
R1.02
The following features have been added into this release:
1. Added support for System Universal Password.
2. Added support for internal modem device.
Version
R1.00
This version of BIOS is released to workaround the following problems:
1. System displays "A20 Failed" during booting when HIMEM.SYS is loaded.
2. System keyboard stops from responding intermittently.
VersionR5.02
This version is released to add the following function:
1. Support PIII 850 MHz CPU.
2. Change LAN IRQ 11 to IRQ 9 if USB is disabled.
3. Fix MDC (Modem) Auto-Detection function fail.
Version
R5.08
This
version is released to workaround the following issues:
1. Support 40 G and 60 GB hard disk.
2. Increase hard disk transfer rate.
VersionR5.10
This version is released to add the following function:
1. Support PIII 766 MHz CPU.
2. AC power lost restart item into CMOS added..
3. Support for Intel D stepping CPUs added.
4. Fixed Hyundai 6 bit panel bottom line disappear issue.
VersionR5.11
This version is released to add the following function:
1. Improve HDD performance in ACPI mode.
2. Fix WinDVD playback failed issue.
VersionR5.16
This version is released to add the following function:
1. Several foreign languages added into CMOS (BIOS) setup.
2. Fix Real Time Clock timer faster issue.
3. Fix cannot boot from CD-ROM if a "HDD Emulation format
Bootable CD" is being used.
4. Remove the warning message occur when "Save-To-Disk partition"
is not found.
VersionR1.01
Information
unavailable.
Version
R1.03
Information
unavailable.
VersionR1.06
This version is released to fix the following errors:
1. Suspend function fail under Windows 2000.
2. Mouse will not work under Windows NT 4.0 after resuming from
Suspend.
3. BIOS does not fully compliant with ACPI under Windows
2000. The error message "The battery is not fully compatible
with ACPI ..." with a blue screen will appear.
4. When pressing "CTRL ALT DEL", Windows 98SE sometimes
does not reboot.
5. When MS-DOS PROMPT is launch within Windows 98SE, typing "EXIT"
does not exit back to Windows.
6. Fan function added.
7. 64MB Shared VGA Memory option added in BIOS.
Version
R1.07
This
version is released to workaround the following issues:
1. Solve problem occurs when the lower RAM slot is being used.
|